::: Predic ::: Mantenimiento Predictivo

Mantenimiento Predictivo

Predictivo

Mantenimiento Predictivo, una de las últimas herramientas de analisis para la anticipación a las averías. Vibración, termografia, espesores, líquidos penetrantes, etc.

Links Predictivo

Enlaces a Mantenimiento Predictivo
Página muy interesante sobre Mantenimiento Preventivo	NORIA
No tiene desperdicio de lo mejor lo mejor	DATASTREAM
Espectacular página de Mantenimiento en el mundo	MANTENIMIENTOMUNDIAL
Página mediocre que no acaba de convencer	SOLO MANTENIMIENTO
Empresa Francesa que examina los sistemas tribologicos	TRIBOLOGID
Portal frances dedicado a la ingenieria y el Mantenimiento buenos articulos	RESEAU MAINTENANCE
Portal ingles dedicado a la ingenieria y el mantenimiento con buenos articulos	PLANT MAINTENANCE RESOURCE CENTER
Páginas de Predictivo
	BEKVIBRO
	VIBANALYSIS
	VIBRATIONSCHOOL
	PREDYCSA
	PLANT-MAINTENANCE


Normas ISO de la vibración
Vibration and shock -- Isolators -- Procedure for specifying characteristics	ISO 2017:1982
Vibration and shock -- Vocabulary	ISO 2041:1990
Mechanical vibration of rotating and reciprocating machinery -- Requirements for instruments for measuring vibration severity	ISO 2954:1975
Reciprocating internal combustion engines -- Performance -- Part 5: Torsional vibrations	ISO 3046-5:2001
Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 7: Vibration fatigue test	ISO 4548-7:1990
Mechanical vibration and shock -- Vibration of buildings -- Guidelines for the measurement of vibrations and evaluation of their effects on buildings	ISO 4866:1990
Mechanical vibration and shock -- Vibration of buildings -- Guidelines for the measurement of vibrations and evaluation of their effects on buildings	ISO 4866:1990/Amd 1:1994
Mechanical vibration and shock -- Vibration of buildings -- Guidelines for the measurement of vibrations and evaluation of their effects on buildings	ISO 4866:1990/Amd 2:1996
Code for the measurement and reporting of shipboard vibration data	ISO 4867:1984
Code for the measurement and reporting of local vibration data of ship structures and equipment	ISO 4868:1984
Electrodynamic vibration generating systems -- Performance characteristics	ISO 5344:2004
Methods for the calibration of vibration and shock pick-ups -- Part 4: Secondary shock calibration	ISO 5347-4:1993
Methods for the calibration of vibration and shock pick-ups -- Part 5: Calibration by Earth's gravitation	ISO 5347-5:1993
Methods for the calibration of vibration and shock pick-ups -- Part 7: Primary calibration by centrifuge	ISO 5347-7:1993
Methods for the calibration of vibration and shock pick-ups -- Part 8: Primary calibration by dual centrifuge	ISO 5347-8:1993
Methods for the calibration of vibration and shock pick-ups -- Part 10: Primary calibration by high impact shocks	ISO 5347-10:1993
Methods for the calibration of vibration and shock pick-ups -- Part 11: Testing of transverse vibration sensitivity	ISO 5347-11:1993
Methods for the calibration of vibration and shock pick-ups -- Part 12: Testing of transverse shock sensitivity	ISO 5347-12:1993
Methods for the calibration of vibration and shock pick-ups -- Part 13: Testing of base strain sensitivity	ISO 5347-13:1993
Methods for the calibration of vibration and shock pick-ups -- Part 14: Resonance frequency testing of undamped accelerometers on a steel block	ISO 5347-14:1993
Methods for the calibration of vibration and shock pick-ups -- Part 15: Testing of acoustic sensitivity	ISO 5347-15:1993
Methods for the calibration of vibration and shock pick-ups -- Part 16: Testing of mounting torque sensitivity	ISO 5347-16:1993
Methods for the calibration of vibration and shock pick-ups -- Part 17: Testing of fixed temperature sensitivity	ISO 5347-17:1993
Methods for the calibration of vibration and shock pick-ups -- Part 18: Testing of transient temperature sensitivity	ISO 5347-18:1993
Methods for the calibration of vibration and shock pick-ups -- Part 19: Testing of magnetic field sensitivity	ISO 5347-19:1993
Methods for the calibration of vibration and shock pick-ups -- Part 22: Accelerometer resonance testing -- General methods	ISO 5347-22:1997
Mechanical vibration and shock -- Mechanical mounting of accelerometers	ISO 5348:1998
Auxiliary tables for vibration generators -- Methods of describing equipment characteristics	ISO 6070:1981
Mechanical vibration -- Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships	ISO 6954:2000
Vibration and shock -- Experimental determination of mechanical mobility -- Part 1: Basic definitions and transducers	ISO 7626-1:1986
Vibration and shock -- Experimental determination of mechanical mobility -- Part 2: Measurements using single-point translation excitation with an attached vibration exciter	ISO 7626-2:1990
Vibration and shock -- Experimental determination of mechanical mobility -- Part 5: Measurements using impact excitation with an exciter which is not attached to the structure	ISO 7626-5:1994
Mechanical vibration of non-reciprocating machines -- Measurements on rotating shafts and evaluation criteria -- Part 1: General guidelines	ISO 7919-1:1996
Mechanical vibration -- Evaluation of machine vibration by measurements on rotating shafts -- Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min	ISO 7919-2:2001
Mechanical vibration of non-reciprocating machines -- Measurements on rotating shafts and evaluation criteria -- Part 3: Coupled industrial machines	ISO 7919-3:1996
Mechanical vibration of non-reciprocating machines -- Measurements on rotating shafts and evaluation criteria -- Part 4: Gas turbine sets	ISO 7919-4:1996
Mechanical vibration of non-reciprocating machines -- Measurements on rotating shafts and evaluation criteria -- Part 5: Machine sets in hydraulic power generating and pumping plants	ISO 7919-5:1997
Mechanical vibrations -- Land vehicles -- Method for reporting measured data	ISO 8002:1986
Shock and vibration measurements -- Characteristics to be specified for seismic pick-ups	ISO 8042:1988
Reciprocating internal combustion engine driven alternating current generating sets -- Part 9: Measurement and evaluation of mechanical vibrations	ISO 8528-9:1995
Mechanical shock -- Testing machines -- Characteristics and performance	ISO 8568:1989
Mechanical vibration and shock -- Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings	ISO 8569:1996
Acceptance code for gears -- Part 2: Determination of mechanical vibrations of gear units during acceptance testing	ISO 8579-2:1993
Mechanical vibration -- Road surface profiles -- Reporting of measured data	ISO 8608:1995
Servo-hydraulic test equipment for generating vibration -- Method of describing characteristics	ISO 8626:1989
Mechanical vibration and shock -- Analytical methods of assessing shock resistance of mechanical systems -- Information exchange between suppliers and users of analyses	ISO 9688:1990
Mechanical vibration -- Vibration testing requirements for shipboard equipment and machinery components	ISO 10055:1996
Damping materials -- Graphical presentation of the complex modulus	ISO 10112:1991
Mechanical vibration and shock -- Vibration and shock in buildings with sensitive equipment -- Part 1: Measurement and evaluation	ISO/TS 10811-1:2000
Mechanical vibration and shock -- Vibration and shock in buildings with sensitive equipment -- Part 2: Classification	ISO/TS 10811-2:2000
Vibration generating machines -- Guidance for selection -- Part 1: Equipment for environmental testing	ISO 10813-1:2004
Mechanical vibration -- Measurement of vibration generated internally in railway tunnels by the passage of trains	ISO 10815:1996
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 1: General guidelines	ISO 10816-1:1995
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min	ISO 10816-2:2001
	ISO 10816-2:2001/Cor 1:2004
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ	ISO 10816-3:1998
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 4: Gas turbine driven sets excluding aircraft derivatives	ISO 10816-4:1998
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 5: Machine sets in hydraulic power generating and pumping plants	ISO 10816-5:2000
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 6: Reciprocating machines with power ratings above 100 kW	ISO 10816-6:1995
Rotating shaft vibration measuring systems -- Part 1: Relative and absolute sensing of radial vibration	ISO 10817-1:1998
Condition monitoring and diagnostics of machines -- Vocabulary	ISO 13372:2004
Condition monitoring and diagnostics of machines -- Vibration condition monitoring -- Part 1: General procedures	ISO 13373-1:2002
Condition monitoring and diagnostics of machines -- Data processing, communication and presentation -- Part 1: General guidelines	ISO 13374-1:2003
Condition monitoring and diagnostics of machines -- General guidelines on data interpretation and diagnostics techniques	ISO 13379:2003
Condition monitoring and diagnostics of machines -- General guidelines on using performance parameters	ISO 13380:2002
Condition monitoring and diagnostics of machines -- Prognostics -- Part 1: General guidelines	ISO 13381-1:2004
Industrial fans -- Method of measurement of fan vibration	ISO 14695:2003
Mechanical vibration -- Vibration of rotating machinery equipped with active magnetic bearings -- Part 1: Vocabulary	ISO 14839-1:2002
Mechanical vibration -- Vibration of rotating machinery equipped with active magnetic bearings -- Part 2: Evaluation of vibration	ISO 14839-2:2004
Mechanical vibration and shock -- Guidelines for dynamic tests and investigations on bridges and viaducts	ISO 14963:2003
Mechanical vibration and shock -- Vibration of stationary structures -- Specific requirements for quality management in measurement and evaluation of vibration	ISO 14964:2000
Vibration and shock generating systems -- Vocabulary	ISO 15261:2004
Methods for the calibration of vibration and shock transducers -- Part 1: Basic concepts	ISO 16063-1:1998
Methods for the calibration of vibration and shock transducers -- Part 11: Primary vibration calibration by laser interferometry	ISO 16063-11:1999
Methods for the calibration of vibration and shock transducers -- Part 12: Primary vibration calibration by the reciprocity method	ISO 16063-12:2002
Methods for the calibration of vibration and shock transducers -- Part 13: Primary shock calibration using laser interferometry	ISO 16063-13:2001
Methods for the calibration of vibration and shock transducers -- Part 21: Vibration calibration by comparison with a reference transducer	ISO 16063-21:2003
Mechanical vibration and shock -- Performance parameters for condition monitoring of structures	ISO 16587:2004
Condition monitoring and diagnostics of machines -- General guidelines	ISO 17359:2003
Mechanical vibration and shock -- Signal processing -- Part 2: Time domain windows for Fourier Transform analysis	ISO 18431-2:2004
Condition monitoring and diagnostics of machines -- Requirements for training and certification of personnel -- Part 1: Requirements for certifying bodies and the certification process	ISO 18436-1:2004
Condition monitoring and diagnostics of machines -- Requirements for training and certification of personnel -- Part 2: Vibration condition monitoring and diagnostics	ISO 18436-2:2003
Mechanical vibration -- Evaluation of measurement results from dynamic tests and investigations on bridges	ISO 18649:2004

Predic.com te trae toda la Ingeniería y Gestión del Mantenimiento con nuevas tecnologías.

El mantenimiento, con sus nuevas herramientas, Predictivo, Preventivo y Proactivo son los objetivos fundamentales de esta Web. Aquí encontrarás cientos de enlaces sobre estos temas y muchos otros más. Como salir del correctivo, como planificar sus necesidades para ello, como prepararse para ser competitivo, como subir su índice de confiabilidad en sus instalaciones, son respuestas que buscamos todos y a las que entre todos trataremos de dar respuestas. Aquí podrás encontrar multitud de páginas que buscan y tratan de dar soluciones para todo ello, páginas de distinta índole pero todas con un enfoque común, la mejora de la ingeniería de gestión del mantenimiento mundial, de las políticas de empresa, de los recursos humanos, de la calidad y del medio ambiente y lo mejor sobre otros muchos temas de interés noticias de última hora por temas, automóvil, motos, física, química y matemáticas, todo lo que pueda estar vinculado al mantenimiento mundial hoy en día.

Predic.com te presenta su Grupo VIP Predic, con multitud de nuevos servicios complementarios a su ya visitada Web, que ayudaran a conseguir su principal objetivo que como todos sabéis, es y ha sido siempre el de ayudar a los profesionales y universitarios del sector de la ingeniería y el mantenimiento. Con este nuevo sitio se completa este círculo y se garantizan todos los servicios necesarios para que nuestros visitantes y socios, estén asistidos y en mutuo contacto en todo momento.

Mantenimiento en estado puro ese es nuestro lema y así queremos continuar, ofreciendo a nuestros lectores lo mejor en Mantenimiento Predictivo, Preventivo o Proactivo y todos los sistemas de gestión del mantenimiento en la empresa.

La ingeniería de mantenimiento y de los procesos, la repercusión en la producción de paradas in deseadas por afectación del mantenimiento de los equipos, anticipación a las averías usando herramientas de última generación y tecnología como:

La aplicación de métodos como el de análisis de vibración,
Análisis de sistemas tribológicos,
Análisis de termografía infrarroja,
Análisis de variables eléctricas o de funcionamiento mecánico
Prevención de los riesgos de avería con análisis de causa raíz etc..

Con una buena distribución tanto de los recursos humanos como materiales, con una planificación y ejecución de los proyectos razonable, con una anticipación adecuada a la avería, con preparación de los repuestos necesarios y de las personas implicadas. Y todo ello mejorando la Calidad de los productos y de los procesos, y defendiendo los intereses del medio ambiente y eliminando todo posible riesgos sobre el, además de defender a ultranza la prevención de los riesgos laborales, tanto por acciones innecesarias como por precipitación de la ejecución de las mismas.

Todo lo anteriormente expuesto son nuestros objetivos de difusión y es lo que nos motiva día a día, y nos hace mejorar. Prueba de esta mejora continua es la aceptación que tiene nuestra Web, la cual, con más de 100.000 visitas en lo que va de año, es una de las más visitadas del sector. Además, nuestros visitantes son de infinidad de países distintos, lo que nos hace reflexionar en sentido positivo sobre su eficacia y su aceptación global, cosa que nos enorgullece y nos anima a seguir por este camino.

Firmado
Predic.com

Palabras clave:Predictivo, mantenimiento predictivo, gestinón del mantenimiento predictivo, mantenimiento, mantención, mantener, mantenimiento clases, manten, predictivo, industria, asesoria, formacion, cursos, consultoria, noticias, trabajo, fotografia, tecnologia, documentos,